Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fit new No plate light to new licence plate bracket (as shown in top picture). To connect new No
plate light we suggest cutting and reusing OEM plug socket, please use heat shrink provided to
protect wires at light end of cable.
Feed indicator wires through slot in new licence plate bracket and clipping into cut away slots in
strengthening webs.
Offer the new licence plate bracket up to the new under-tray while feeding wires through larger
central hole in under-tray and secure using M5x12mm long button head bolts and 5mm washers.
Offer the complete assembly up to rear of bike while feeding all wires through as original and
secure in original position (the bolts are to go through metal bracket) using four M6x20mm long
button head bolts and washers (the bolts with washers are fed through from underneath and the
nyloc nuts are fitted from above against metal brackets).
Refit rear light cowl as original.
Reroute all cables as original and connect indicators, rear light and No plate light wiring plugs as
original.
Check operation of all lights at this stage.
Refit seat cowls.
Refit pillion seat.
Refit rider seat.
Refit side panels.
Refit licence plate.
IMPORTANT: IF FITTING A FULL-SIZE LICENCE PLATE AND PLACING IT
FAR DOWN ON THE LICENCE PLATE HANGER, THERE IS A SMALL
CHANCE OF THE LICENCE PLATE HITTING THE BACK WHEEL UNDER
HEAVY LOAD AND OVER LARGE BUMPS IN THE ROAD. IT IS YOUR
RESPONSIBILITY TO CHECK FOR THIS POSSIBILITY AND TAKE
AVOIDING ACTION. FAILURE TO CHECK THIS COULD RESULT IN
SERIOUS INJURY.
Depending on local laws, attach enclosed red reflective tape in an appropriate location.
Please test the indicators, rear/brake light and licence plate illuminator before riding.
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design
changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order. The
Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other than those
in R&G's order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for
its particular purposes. Where R&G fits the Products or undertakes other services it shall exercise reasonable skill and care and rectify
any fault free of charge unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the warranty on the
motorcycle is not affected by the fitting of the Products. On return of any defective Products R&G shall at its option either supply a
replacement or refund the purchase money but shall not be liable if the Products have been modified or used or maintained otherwise
than in accordance with R&G's or manufacturer's instructions and good engineering practice or if the defect arises from accident or
neglect. Other than identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not be
liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or
the fitting or service concerned. These terms do not affect the Buyer's statutory rights.
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were
purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in re-
sellable condition, in the opinion of R&G Racing. All returns are subject to a 25% restocking and handling fee (25% of the gross value
exc. P&P – at the prevailing price at time of purchase). The customer must pay any and all carriage charges. No returns of
discontinued products, unless within 14 days of purchase. This policy does not affect your statutory rights and does not refer to faulty
goods.
Unit 5K, Blacknest Industrial Park, Blacknest Road, Alton, Hampshire, GU34 4PX
Tel: +44 (0)870 220 6380 Fax: +44 (0)1420 521101
CONSUMER NOTICE
R&G RACING RETURNS POLICY (NON-FAULTY GOODS)
R&G Racing
www.rg-racing.com
Email:
info@rg-racing.com
Werbung
