Kärcher HDR 777 Bedienungsanleitung Seite 16

2 Recycling operations with high-pres-
sure cleaner
3 Recycling operations with high-pres-
sure cleaner and inlet into the drainage
system
4 Recycling operations with buffer tank at
the end
5 Recycling operations with buffer tank at
the end and inlet into the drainage sys-
tem
All 5 operation modes need different instal-
lations, see "Plant installation".
 Turn the main switch to position "1"
16
Shutting down
 Turn the main switch to position "0"
 Water must be drained out of the sys-
tem by opening the drain cock if the
plant is to remain idle for a longer time
or if there are frost conditions.
Storage
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Transport
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Technical specifications
Nominal voltage V
Frequency Hz
Power kW
Depth mm
Width mm
Height mm
Weight, empty kg
Weight, full kg
Sound pressure level dB(A)
L
pA
Uncertainty K dB(A)
pA
Max. throughput; liquid l/h
splitting agent
Max. throughput; split- l/h
ting powder
Contents of storage l
tank
Consumption of liquid ml/m
splitting agent
Consumption of split- kg/m
ting powder
Consumption of sterili- ml/m
sation agent
4
-
EN
Care and maintenance
Only a well-maintained plant is safe. En-
sure that you carry out regular mainte-
nance tasks according to the following
maintenance plan.
DANGER
– Risk of accident due to improper main-
tenance! Service and repairs may only
be carried out by authorised persons or
Kärcher Customer Service.
– Risk of injury! Never intervene in the re-
action tank when the plant has been
switched on or the stirrer is on.
DANGER
Risk of electric shock.
– Before starting any work on the plant,
switch off the main switch and pull out
the plug.
– Switch off both the devices in case of
recycling operations with high-pressure
cleaner.
– The switching cabinet may only be
230/1~
opened when the plant has been
50
switched off and separated from the
1,2 power supply.
Use exclusively original parts of the manu-
630
facturer or those parts recommended by
1300
him. Observe all instructions on safety and
1300
use which are accompanying these parts.
165
This concerns:
485
– replacement and wear parts
– Accessory parts
< 60
– Fuel
1
800
600
250
ca. 225
3
ca. 1
3
ca. 100
3