Clarion CZ309E Benutzerhandbuch Seite 9

CD/MP3/WMA Operations
This unit can play back MP3/WMA fi les
Notes:
• This unit does not support DRM
• If you play a file with DRM (Digital Rights
Management) while WMA remains ON, no
audio is output (The WMA indicator blinks).
• Windows Media™, and the Windows
are trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
To disable DRM protected fi les
synchronisation from WMP (Digital Rights
Management)
When using Windows Media Player 9/10/11,
click on the TOOL OPTIONS MUSIC
RECORD tab, then under Recording settings,
unclick the Check box for RECORD PRO-
TECTED MUSIC. Then, reconstruct fi les.
Personally constructed WMA fi les are used at
your own responsibility.
Precautions when creating MP3/
WMA fi les
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate
8 kbps-320 kbps / VBR
2. WMA: Bit rate 8 kbps-320 kbps
File extensions
1. Always add a fi le extension ".MP3", ".WMA"
or ".M4A" to MP3, WMA fi les by using sin-
gle byte letters. If you add a fi le extension
other than specifi ed or forget to add the fi le
extension, the fi le cannot be played.
2. Files without MP3/WMA data will not play.
The fi les will be played soundlessly if you
attempt to play files without MP3/WMA
data.
* When VBR fi les are played, the play time
display may diff er from the play location.
* When MP3/WMA fi les are played, a slight
silence will be noticed between tunes.
Logical format (File system)
1. When writing MP3/WMA files on a CD-R
disc or CD-RW disc, please select "ISO9660
level 1, 2 or JOLIET or Romeo" or APPLE
ISO as the writing software format. Normal
play may not be possible if the disc is re-
14
corded in another format.
2. The folder name and fi le name can be dis-
played as the title during MP3/WMA play
but the title must be within 64 single-byte
alphabetical letters and numerals (including
the extension).
3. Do not affi x a name to a fi le inside a folder
logo
®
having the same name.
Folder structure
Discs with a folder having more than 8 hierar-
chical levels cannot be played.
Number of fi les or folders
1. Up to 999 files can be recognized per
folder. Up to 65535 fi les can be played.
2. Tracks are played in the order that they
were recorded onto the disc. (Tracks might
not always be played in the order displayed
on the PC.)
3. Some noise may occur depending on the
type of encoder software used while re-
cording.
Set the type of fi le to be played
(multi-session function)
* Default setting is "OFF".
• When playing mixed CDs, and one session
CDs, select OFF.
• When playing mixed, extra, multi-session
CDs, set to ON.
Press the [ADJ] button repeatedly until MULT
appears on the display. Then turn the [VOL/
SEL] knob to select ON or OFF.
Backup Eject function
Just pressing the [ ] button ejects the disc
even if the power to the unit is off .
1. Press the [OPEN] button to open the FLIP-
DOWN PANEL.
Note:
• If the FLIP-DOWN PANEL will not open
far enough, gently open it with your hand.
2. Press the [ ] button. Remove the disc
after it is ejected.
3. Close the FLIP-DOWN PANEL.
* Press the center of the DCP to close.
Notes:
• Always close the FLIP-DOWN PANEL once
CD/MP3/WMA Operations
you take out the disc.
• If you force a CD into the loading slot be-
fore auto reloading starts, this can damage
the CD.
• If a CD (12 cm) is left in the ejected posi-
tion for 15 seconds, the CD is automatically
reloaded (Auto reload).
Listening to a disc already loaded
in the unit
Press the [SRC] button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
If there is no disc loaded, the indication "NO
DISC" appears in the title display.
Loading a CD
1. Press the [OPEN] button to access the CD
SLOT behind the FLIP-DOWN PANEL.
2. Insert a CD into the center of the CD SLOT
with the labeled side facing up. The CD
plays automatically after loading.
Notes:
• Never insert foreign objects into the CD
SLOT.
• If the CD is not inserted easily, there may
be another CD in the mechanism or the
unit may require service.
• Discs not bearing the
and CD-ROMs cannot be played by this
unit.
• Some CDs recorded in CD-R/CD-RW
mode may not be usable.
3. Close the FLIP-DOWN PANEL.
* Press the center of the DCP to close.
CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP-DOWN PANEL.
Notes:
• If the FLIP-DOWN PANEL does not open
fully, gently open it with your hand.
• After loading a CD, always close the FLIP-
DOWN PANEL.
Autogoods products «130»
Pausing play
1. Press the [ 1/ ] button to pause play.
"PAUSE" appears in the display.
2. To resume CD play, press the [ 1/
again.
Displaying CD titles
This unit can display title data for CD-text/
MP3/WMA discs and user titles input with this
unit.
The display changes in the following order
each time you press the [DISP] button to
change the title display.
CD-TEXT disc
User > Track > Disc/Artist > User...
MP3/WMA disc
Track > Folder > Title/Album > Artist > Track ...
Notes:
• If the CD playing is not a CD-text CD or no
user title has been input, "NO TITLE" ap-
pears in the display.
• If a MP3/WMA disc does not have a TAG,
"NO TITLE" appears in the display.
• Only ASCII characters can be displayed for
Tags.
Selecting a track
or mark
Track up
TEXT
1. Press the [ ] button to move ahead to
the beginning of the next track.
2. Each time you press the [
track advances the beginning of the next
track.
3. Press and hold the [ 6 ] button to move
ahead by +10 tracks.
Track down
1. Press the [ ] button to move back to the
beginning of the current track.
2. Press the [ ] button twice to move back
to the beginning of the previous track.
3. Press and hold the [ 5 ] button to move
back by -10 tracks.
Fast-forward/Fast-reverse
Fast-forward
Press and hold the [ ] button.
] button
] button, the
15