Clarion CZ309E Benutzerhandbuch Seite 13

USB Devices
Problem Cause
USB device cannot be The USB device has
inserted. been inserted with wrong
direction.
The USB connector is
broken.
USB device is not The USB device is
recognized. damaged.
Connectors are loose.
No sound heard with
No MP3/WMA fi le is stored
the display "No File"
in the USB device.
shown.
Sound skips or is MP3/WMA fi les are not
noisy. encoded properly.
22
Measure
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
diff erent USB device.
Store these fi les properly in the USB device.
Use MP3/WMA fi les encoded properly.
Autogoods products «130»
7. SPECIFICATIONS
FM Tuner
Frequency range: 87.5–108.0 MHz (Europe)
Usable sensitivity: 8 dBμ
Frequency response: 30 Hz-15 kHz
Stereo separation: 30 dB (1kHz)
Signal/noise ratio: >55 dB
AM Tuner
Frequency range: 531–1602 kHz
Usable sensitivity (S/N=20 dB): 30 dBμ
CD
System: Digital Compact Disc audio system
Frequency response: 20 Hz–20 kHz
Signal/noise ratio: >75 dB
Total harmonic distortion: Less than 0.1% (1 kHz)
Channel separation: >60 dB
MP3/WMA mode
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps / VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format: ISO9660 level 1,2
Joliet or Romeo fi le system
USB
Specifi cation: USB 1.0/2.0
Playable audio format:
MP3(.mp3): MPEG 1/2/Audio Layer-3
WMA(.wma): Ver 7/8/9.1/9.2
Bluetooth
Specifi cation: Bluetooth Ver. 2.0
Profi le: HFP (Hands-Free Profi le)
OPP (Object Push Profi le)
A2DP (Advanced Audio Distribution Profi le)
Send/Receive Sensitivity: Class 2
Audio Amplifi er
Maximum power output:
160 W (40 W × 4)
Output Power:
4 × 22 W (DIN 45324, +B=14.4 V)
Speaker impedance: 4 (4 to 8 allowable)
Input
Audio input sensitivity:
High: 0.65 V (at 2 V output)
Mid: 1.3 V (at 2 V output)
Low: 2.0 V (at 2 V output)
(input impedance 10 k or greater)
Aux-in level: 500m V
General
Power supply voltage:
14.4 VDC (10.8 to 15.6 V allowable), negative
ground
Pre-Amp output voltage:
2.0 V (CD play mode: 1 kHz, 0 dB, 10 k load)
Fuse: 15 A
Dimensions of Main Unit:
188 mm Width × 58 mm Height × 190 mm Depth
Weight of Main Unit: 1.42 kg
Dimensions of Remote Control unit:
52.5 mm Width × 7.8 mm Height × 115.5 mm
Depth
Weight of Remote Control Unit:
36 g (including battery)
178 mm 50 mm
46 mm
172 mm
58 mm
188 mm
Notes:
• Specifications comply with JEITA Stand-
ards.
• Specifications and design are subject to
change without notice for further improve-
ment.
23