Kärcher HKF 50 M Bedienungsanleitung Seite 10

Fault
Motor does not turn.
Motor does not turn, clean-
ing head does not turn
Cleaning head only turns
around one axle or abrupt-
ly
Uneven cleaning jet
Spray volume too low.
Significant quantities of
cleaning liquid are leaking
from the drainage borings
of the support pipe.
Significant pressure loss,
but no cleaning liquid
leaks at the drainage bor-
ings
Accessories
Description
Hole cone
Locking screw (for 1 noz-
zle operation)
Double handle
CE declaration
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
Product: Internal cleaner
Type: HKF 50 M
Relevant EU Directives
98/37/EC
2006/95/EC
89/336/EEC (+91/263/EEC, 92/31/EEC,
93/68/EEC)
Applied harmonized standards
EN 55014–1: 2000 + A1: 2001 + A2: 2002
EN 55014–2: 1997 + A1: 2001
EN 60204–1
10
English
Possible cause
There is no voltage at the motor.
Thermal protection switch in the
coil has triggered.
Error current protective switch
was triggered.
Drive parts in support pipe bro-
ken.
Cleaning head touches container
wall.
Excessive tooth play in the bevel
wheels.
Destroyed gears on bevel wheels. Replace bevel wheels.
Spray nozzles clogged.
Spray nozzles damaged.
Leak on the cleaning head or its
supply line.
Filter in the supply line plugged.
Slide ring gaskets in the support
pipe are worn.
Slide ring gaskets in the cleaning
head are worn.
EN 61000–3–2: 2000 + A2: 2005
EN 61000–3–3: 1995 + A1: 2001
5.957-453
Order No.
4.132-002
The undersigned act on behalf and under
the power of attorney of the company man-
5.411-061
agement.
2.863-036
Alfred Kärcher GmbH Co. KG
Alfred Kärcher-Str. 28 - 40
D - 71364 Winnenden
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
In the event of a warranty claim please con-
tact your dealer or the nearest authorized
Customer Service centre. Please submit
the appliance, including all accessories,
and the proof of purchase.
Troubleshooting
Remedy
Check fuse and cables.
Fix cause for overload.
Remove cause and reset error current protec-
tive switch.
Check parts and replace defective parts.
Change position of cleaning head and make
sure it can run smoothly.
Adjust and replace worn parts.
Clean spray nozzles.
Replace spray nozzles.
Check pump, check pressure lines/hoses.
Clean filter.
Check parts and replace defective parts.
Check parts and replace defective parts.
Warranty
of whom
Electricians
Electricians
Electricians
Customer Service
Operator
Customer Service
Customer Service
Operator
Operator
Operator
Operator
Customer Service
Operator