cattani MICRO SMART Gebrauchsanweisung Seite 36

System Parameters Setup menu
To access this menu and/or make any changes, you are
required to enter the access password 0000456000 (see
instructions on page 31).
To change any parameters in this menu:
Scroll with through to display the required para-
meter.
Press the Enter Key to enable the cursor. The fi gure can
I
be changed using the arrow keys
Once the fi gure has been set to the desired fi gure, press the
Enter Key again to confi rm and continue.
I
All the parameters can be regulated.
Min. Vacuum Setting
Max. Blower Output Frequency at the Min. Setting
Blower Current limit at the Min. Setting
Medium Vacuum Setting
.
35