Kärcher CNS 18-30 Battery Bedienungsanleitung Seite 29

Warranty
The warranty conditions issued by our sales company
responsible apply in all countries. We shall remedy pos-
sible malfunctions on your device within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Technical data
Device performance data
Working voltage of the battery
No-load chain speed
Chain oil tank volume
Determined values in acc. with EN 62841-1,
EN 62841-4-1
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
wA
Uncertainty K
WA
Front handle hand-arm vibration
value
Rear handle hand-arm vibration
value
Uncertainty K
Dimensions and weights
Length x width x height
Guide rail length
Cutting length
Chain pitch
Weight (without battery pack)
Subject to technical modifications.
Vibration and noise value
The declared vibration total values and the declared
noise emission values have been measured in accord-
ance with a standard test method and may be used for
comparing one tool with another.
The declared vibration total values and the declared
noise emission values may also be used in a preliminary
assessment of exposure.
WARNING
The vibration and noise emissions during actual use of
the power tool can differ from the declared values de-
pending on the ways in which the tool is used especially
what kind of workpiece is processed.
Identify safety measures to protect the operator that are
based on an estimation of exposure in the actual condi-
tions of use (taking account of all parts of the operating
cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
CNS 18-
30
V 18
m/s 10
ml 200
dB(A) 92,3
dB(A) 3,0
dB(A) 100,3
dB(A) 3,0
2
m/s 3,5
2
m/s 5,2
2
m/s 1,5
mm 735 x
230 x
247
mm 300
mm 250
in (mm) 0,375
(9,525)
kg 3,44
English
Device with a hand-arm vibration value >
2.5 m/s² (see chapter Technical Data in the
operating instructions)
CAUTION
● Uninterrupted use of the device
for several hours can lead to numbness. ● Wear warm
gloves to protect your hands. ● Take regular breaks
from work.
Declaration of Conformity
EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Cordless chainsaw
Type: 1.444-00x.x
Currently applicable EU Directives
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
2000/14/EC (+2005/88/EC)
Harmonised standards used
EN IEC 63000: 2018
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 62481-1: 2015 + A11: 2022
EN 62841-4-1: 2020
Conformity evaluation procedure used
2000/14/EC and amended by 2005/88/EC: Annex V
Sound power level dB(A)
Measured:98,9
Guaranteed:101
Notified body, 0197 TÜV Rheinland LGA Products
GmbH; Tillystraße 2 D - 90431 Nürnberg, Germany has
carried out EC type approval, registration number:
BM 50580296 0001
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2023/06/30
Declaration of Conformity (UK)
We hereby declare that the product described below
complies with the relevant provisions of the following
UK Regulations, both in its basic design and construc-
tion as well as in the version put into circulation by us.
This declaration shall cease to be valid if the product is
modified without our prior approval.
Product: Cordless chainsaw
Type: 1.444-00x.x
29