HIKOKI RA 18DA Bedienungsanleitung Seite 10

English
V Rated voltage
n
No-load speed
0
Disconnect the battery
Switching ON
Switching OFF
Continuous operation
Warning
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 219.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Blowing dust, cutting-chips, etc. off of materials and
tools
○ Cleaning tight spaces and crevices
○ Infl ating/defl ating swim rings, air mattresses, and similar
infl atable items
SPECIFICATIONS
1. Power tool
Model
Voltage
No-Load Speed
Maximum*
Air velocity
Average*
Maximum air volume*
Continuous operating
time (when BSL36A18 is
used)*
3
Battery available for
this tool
Weight*
4
*1 With air dusting nozzle
*2 Without air dusting nozzle
*3 For guidance purposes only. Results will diff er according
to situations such as operating environment and battery
condition.
*4 According to EPTA-Procedure 01/2014
The weight includes the battery, air dusting nozzle, and
hook.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
2. Battery (sold separately)
Model
Voltage
Battery capacity
Available cordless
products**
Available charger
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 4 (on page 3).
10
RA18DA
18 V
89000 min
–1
122 m/s
1
100 m/s
1
0.70 m /min
2 3
Approximately 19 minutes
Multi volt battery,
BSL18 Series
1.2 kg (BSL36A18)
1.5 kg (BSL36B18)
BSL36A18 BSL36B18
36 V / 18 V (Automatic Switching*)
2.5 Ah / 5.0 Ah 4.0 Ah / 8.0 Ah
(Automatic Switching*)
Multi volt series, 18 V product
Sliding charger for lithium ion
batteries