Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPEN WINDOW DETECTION,
ACTIVATION/ DEACTIVATION OF
THE AUTO MODE
The automatic mode enabled is the default setting.
auto
mode
1- Press
or
.
On
= automatic mode enabled.
OFF
= automatic mode disabled.
auto
mode
2- To save and move automatically to the next setting, press
. To exit the user settings, press
PIN CODE LOCK
Overview
Your heating device is protected by a safety code against
nonauthorised use. The PIN code (Personal Identity Number)
is a customisable 4 numbers code. When enabled, it prevents
access to the following settings:
- Selecting the Comfort mode : The access to the Comfort
mode is forbidden, only the Auto, Eco and Frost protection
modes are available.
- Minimum and maximum Limits of the setting temperature
range (the Comfort temperature modification is forbidden out
of the authorised setting range).
- Programming mode.
- Open window detection settings.
- Setting the Eco mode temperature lowering-level.
- Setting the Frost protection temperature.
3 important steps are needed for the first use of the PIN code
lock:
1 - PIN code initialisation, enter the preset PIN code (0000) to
access to the feature.
2 - Activation of the PIN Code, to lock settings which will be
protected by the PIN code.
3 - Customizing the PIN code, replace 0000 by the custmized
code.
PIN code initialisation
By default, the PIN code is not enabled.
display.
prog
boost
OK
prog
boost
OK
3 times.
OFF
appears on the
1- By default registered PIN code is 0000.
Press
or
to select 0. It is blinking.
Save by pressing
.
auto
mode
2- For others numbers, select 0 by press
When 0000 appears, press on
auto
mode
The PIN code is initialized, the next setting automaticaly
appears: PIN Code activation.
Activation/deactivation of the PIN Code
OFF
1-
appears on the display.
Press
or
, to enable PIN code.
ON
appears on the display.
ON
= PIN code enabled
OFF
= PIN code disabled
auto
mode
2- Press
to save and return to the home installer
settings display.
auto
mode
The PIN code is enabled. Any modification of reserved settings
listed in „Overview" is now impossible.
Customizing the PIN code
If you have just activated the PIN code, follow the stages des-
cribed below.
prog
boost
OK
1
2
.
again to save and exit.
prog
boost
OK
prog
boost
OK
prog
boost
OK
DE
37
Werbung
