Herunterladen Diese Seite drucken

Purmo FLORES E Montage- Und Betriebsanleitung Seite 24

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
INSTALLATION & MAINTENANCE
1. GENERAL INFORMATION
WARNING ATTENTION – SOME PARTS OF THIS PRODUCT MAY
BECOME VERY HOT AND CAUSE BURNS. PARTICULAR ATTENTION
SHOULD BE GIVEN IN PRESENCE OF CHILDREN AND VULNERABLE
PEOPLE.
IT IS ADVISABLE TO KEEP CHILDREN OF LESS THAN 3 YEARS OLD
AWAY FROM IT, UNLESS THEY ARE UNDER CONSTANT SUPERVI-
SION.
CHILDREN AGED BETWEEN 3 AND 8 YEARS OLD SHOULD ONLY BE
ALLOWED TO SWITCH THE APPLIANCE ON AND OFF IF IT HAS BEEN
POSITIONED OR INSTALLED IN A NORMAL, EXPECTED POSITION
AND THEY ARE PROPERLY SUPERVISED OR HAVE BEEN INSTRUC-
TED ON SAFE USE OF THE APPLIANCE AND THE POTENTIAL RISKS
HAVE BEEN UNDERSTOOD.
CHILDREN AGED BETWEEN 3 AND 8 YEARS OLD MUST NOT PLUG
IN, REGULATE OR CLEAN THE APPLIANCE, NOR CARRY OUT ANY
USER MAINTENANCE WORK. THIS APPLIANCE CAN BE USED BY
CHILDREN OVER 8 YEARS OLD AS WELL AS BY PEOPLE WITH RE-
DUCED PHYSICAL, SENSORY OR MENTAL CAPACITIES OR LACKING
IN EXPERIENCE OR KNOWLEDGE, IF THEY ARE PROPERLY SUPER-
VISED AND IF THEY HAVE BEEN GIVEN INSTRUCTION ON THE SAFE
USE OF THE APPLIANCE AND IF THE POTENTIAL RISKS HAVE BEEN
UNDERSTOOD. CHILDREN SHOULDN'T APPROACH THE APPLIANCE
NOR CLIMB ON IT.
USER CLEANING AND MAINTENANCE MUST NOT BE DONE BY
CHILDREN WITHOUT SUPERVISION.
TO AVOID ANY DANGER FOR VERY YOUNG CHILDREN, IT IS RE-
COMMENDED THAT THE APPLIANCE IS INSTALLED SO THAT THE
LOWEST HEATING BAR IS AT LEAST 600 MM ABOVE THE FLOOR.
THE APPLIANCE IS ONLY INTENDED FOR DRYING CLOTH WASHED
IN WATER.
IF THE POWER CABLE IS DAMAGED, IT MUST BE REPLACED BY
THE MANUFACTURER, THEIR AFTER SALES SERVICE OR PEOPLE
WITH SIMILAR QUALIFICATIONS IN ORDER TO AVOID ANY DANGER.
THE HEATING APPLIANCE MUST NOT BE PLACED JUST BELOW A
POWER PLUG; ALL INTERVENTIONS ON THE APPLIANCE MUST BE
DONE WITH IT SWITCHED OFF AND BY A QUALIFIED PROFESSIO-
NAL.
TOWEL RAILS RADIATORS ARE SEALED ELECTRIC RADIATORS
DESIGNED FOR FIXED WALLMOUNTED INSTALLATION
IN ELECTRIC VERSION TOWEL RAILS RADIATOR IS SUPPLIED
COMPLETE WITH CONNECTION CABLE AND WALL BRACKETS,
AND HAVE A DOUBLE INSULATED ELECTRICAL PART - CLASS
II.
CAUTION: THIS RADIATOR MAY BE HOT TO TOUCH. IT IS THE RES-
PONSIBILITY OF THE INSTALLER
TO ENSURE THIS CAUTION IS BROUGHT TO THE ATTENTION OF
ALL USERS. IF THE INSTRUCTIONS FOR FITTING AND USE ARE NOT
FOLLOWED, THIS MAY LEAD TO OVERHEATING AND MALFUNCTION.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BE-
GINNING INSTALLATION.
24
STANDARDS ELECTRIC VERSIONS : CLASS II - IP44
DOUBLE INSULATION. THEY ALSO COMPLY WITH THE
EUROPEAN DIRECTIVE CEM 2014/30/UE AND BASSE
TENSION 2014/35/UE (CE MARKING ON ALL THE APPLIANCES).
2. OPERATING INSTRUCTIONS OF YOUR
TOWEL RAILS
To make the most of your towel rail and for greater comfort, we would
ask you to take the following recommendations into account:
2.1 POSITIONING
The diagrams below show the appliance's correct positioning.
For bathroom installations the appliance must be installed outside
zone 1 with the electrical connection outside zone 2 (see diagram
below), in accordance with the latest electrical safety regulations,
and in such a way that the controls cannot be reached by a per-
son using the bath or shower
fig.1
fig.2
The appliance must be installed on a vertical wall and the power cable
must be located at the bottom.
The radiator should be mounted on a vertical wall with the
connection cord at the bottom of the radiator,
The lower part of the radiator must be within a minimum distance
of 150mm from the ground,
The radiator must not be installed within 50mm of a wall or
underwneath a power outlet,
Improper installation of a shelf above the radiator must be carried
out over 150mm of it,
It is recommended to perform the installation, if possible, close
to locations with high heat losses (windows etc) and using screw
fasteners appropriate to the nature of the wall,
Drill and plug the 4 fixing holes in a suitable location,
Secure the radiator to the wall using the screws 3 or 4 fixing
holessupplied,
Make the electrical connection.
2.2 BRACKETS
For the correct installation of radiators it is essential that the fixing of
the radiator is carried out in such a way that it is suitable for intended
use AND predictable misuse. A number of elements need to be taken
into consideration including the fixing method used to secure the
radiator to the wall, the type and condition of the wall itself, and any
additional potential forces or weights that may happen to be applied to
the radiator, prior to finalising installation.
For correct heater installation, when the appliance is located close
to a wall, it is essential to leave a minimum distance of 250 mm to
access the installation.
Use bracket screws suited to your type of wall, secure the heater
on the wall using the screws
provided with the towel rails.
The towel rail must be installed on a vertical wall using the wall
mounts supplied.
The towel rails' mounting components are adjustable vertically,
horizontally and as regards depth (seeexploded diagram in the
box), which makes correct installation easier. Positioning can be
seen from the figure on the drawing page.

Werbung

loading

Diese Anleitung auch für:

Flores c e