Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
A - Green colour
Ideal tempera-
ture.
SETTING THE COMFORT MODE
TEMPERATURE
You can access the Comfort temperature set up from the Auto
and Comfort Mode. It is preset to 19°C.
Using
and
30°C by intervals of 0.5° C.
Note:
you can limit the Comfort temperature; see page 34 for
more details.
CONSUMPTION INDICATION ACCUMULATED
IN KWH, ENERGY SAVINGS
It is possible to see the estimation of energy consumption in
kWh since the last reset of the energy meter.
Display of the estimated power consumption
To see this estimation, from Auto,
Comfort, Eco or Frost protection
mode, then press
Um den Anzeigemodus für den
To exit the display mode of
consumption: press any button, the device is automatically in
the previous active mode.
Resetting the energy meter
To reset the energy meter, from Auto, Comfort, Eco or Frost
protection mode, then proceed as follows.
1- Press
.
2- Press simultaneously
seconds.
To exit resetting the energy meter, press any button,
the device is automatically in the previous active mode.
CHILD ANTI-TAMPER, KEYPAD LOCK/
UNLOCK
Keypad lock
To lock the keypad, press
the
and
buttons
and hold them down for 10
seconds. The padlock sym-
bol
appears on the
display, the keypad is
locked.
28
Setting tempera-
ture ≤ 19°C
auto
When the setting
temperature is
lower or equal
to 19°C
mode
you can adjust the temperature from 7°C to
auto
prog
mode
.
1 2 3 4 5 6 7
and
for more than 5
auto
3
mode
Keypad unlock
prog
To unlock the keypad, press the
down for 10 seconds again. The padlock symbol
from the display, keypad is unlocked.
boost
OK
When keypad is locked, only the key
If the device is on Standby mode when the keypad is
locked, you have to unlock it for the next heating on to
access the setup.
7 DAY AND DAILY PROGRAMME
INTEGRATED, ENERGY SAVINGS
In this mode, you have the option of programming your device,
by setting one of the five programmes on offer for each day of
the week.
boost
Access to the programming mode
OK
From Auto, Comfort, Eco or Frost protection mode, press
for 5 seconds to enter into the programming mode.
Schematic sequence of programming settings:
Setting time
Setting day and time
IIn this mode, you can set day and time to program your
device in line with your needs.
1- From Auto, Comfort, Eco or Frost protection mode, press
for 5 seconds.
The cursor moves to the setting day and time mode.
2- Select using
The hours will scroll quickly, if you press the or
hold them.
Save by pressing
prog
boost
OK
and
buttons hold them
Programmes
Setting day
auto
prog
boost
1
OK
mode
5 sec.
or
. The two hour figures will flash.
.
auto
prog
boost
1
OK
mode
1
disappears
is active.
choice
and
2
Werbung
