Purmo FLORES E Montage- Und Betriebsanleitung Seite 36

DE
RESTORING FACTORY SETTINGS
In order to a coming back to factory settings, proceed in the
following order:
1- From the setting of the temperature unit, press
appears on the display.
NO
2- flashes. Press
YES
= Factory settings reset
NO
= Factory settings not reset
3- Press the key
initial configuration and goes back automatically to the
home display of the user settings.
INSTALLER SETTINGS
ACCESS
You access to installer settings in 4 steps:
From Auto, Comfort, Eco or Frost protection mode :
1
Press for 5
seconds
Setting sequence:
Open window detection
36
auto
prog
boost
OK
mode
YES
or to select .
auto prog
boost
OK
mode
for 5 seconds. The device returns to its
Information 2
display
auto prog
boost
1
Press briefly
twice
OK
mode
PiN code lock Restoring factory settings
Rest
.
The following factory values will be effective:
Parameters
Comfort setting temperature
Boost duration
TKeypad lock
Eco mode temperature lowering-level
Frost protection temperature
Minimum set of Comfort setting
temperature
Maximum set of Comfort setting
temperature
Maximal Boost duration
Maximum ambient temperature for
the automatic stop of the Boost
Temperature unit
Press to exit the user settings.
3
Information
display
auto
prog
boost
Press for 10
1
seconds
OK
mode
auto prog
boost
OK
mode
auto prog
boost
OK
mode
Factory settings
Operating
19°C
60 min.
Disabled
User settings
-3,5°C
7°C
7°C
30°C
60 min.
35°C
°C
InSt
= Installer
settings
auto prog
boost
OK
mode
5 sec.
4
Press briefly