Purmo FLORES E Montage- Und Betriebsanleitung Seite 35

• High temperature limit
Locking of the setting range using a maximum temperature in-
crease, preventing the temperature from being set above that
temperature.
The maximum setting is preset to 30°C. You can adjust from 19°C to
30°C by intervals of 1°C.
8- To change the maximum temperature setting, press
.
auto
mode
To save and move automatically to the next setting, press
. To exit the user settings, press
SETTING OF THE MAXIMUM DURATION OF
AUTHORISED BOOST
The maximum duration of Boost is preset at 60 minutes. You
can adjust it from 30 to 90 minutes by intervals of 30 minutes.
9- The Boost symbol and the heating indicator appears on the
display and the preset duration of 60 minutes flash.
auto
mode
10- Press
or , to display the desired duration.
auto
mode
11- To save and move automatically to the next setting, press
.
auto
mode
To exit the user settings, press
prog
boost
OK
1 2
twice.
prog
boost
OK
prog
boost
OK
prog
boost
OK
twice.
SETTING OF THE MAXIMUM AMBIENT TEM-
PERATURE FOR THE AUTOMATIC STOP OF
THE BOOST
When the Boost is enabled, the device has to heat the room
until the temperature limit: the maximum ambient temperature.
When it is reached, the Boost stops automatically.
or
It is preset at 39°C, you can adjust it from 25°C to 39°C by
intervals of 1°C.
The Boost symbol and the heating indicator appear on the
display and the maximum temperature flashes.
12- You can set the Boost maximum temperature by pressing
or from 25°C to 39°C by intervals of 1°C.
13- To save and move automatically to the next setting, press
. To exit the user settings, press
SETTING THE TEMPERATURE UNIT
The preset temperature unit is degrees Celsius.
14- Press or
15- To save and move automatically to the next setting, press
.
To exit the user settings, press
auto prog
boost
OK
mode
twice.
to change the temperature unit.
auto prog
boost
OK
mode
auto prog
boost
OK
mode
twice.
EN
35