Stihl FSA 200.0 R Gebrauchsanleitung Seite 54

English
Noise Emission in the Environment by Equip‐
ment for use Outdoors Regulations 2001 and
has been developed and manufactured in
accordance with the versions of the following
standards valid on the date of manufacture:
EN 55014‑1, EN 55014‑2, EN 62841-1 and ISO
12100 taking into account IEC 62841-4-4, EN
60335-1 and EN 50636-2-91.
The measured and guaranteed sound power lev‐
els have been determined in accordance with UK
regulations Noise Emission in the Environment
by Equipment for use Outdoors Regulations
2001, Schedule 9.
Notified Body involved: AnP Certification Limited,
2 Parkfield Street, Rusholme, Manchester M 14
4PN
– Measured sound power level: 94 dB(A)
– Guaranteed sound power level: 96 dB(A)
The technical documentation is stored at
ANDREAS STIHL AG & Co. KG.
The year of manufacture, country of manufacture
and machine number are specified on the rating
plate of the brushcutter.
Waiblingen, 2022-10-15
ANDREAS STIHL AG & Co. KG
pp
Robert Olma, Vice President, Regulatory Affairs
& Global Governmental Relations
27 General Power Tool Safety
Warnings
27.1 Introduction
This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the
IEC 62841 standard for hand-held motor-oper‐
ated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding
an electric shock given under "Electrical Safety"
do not apply to STIHL cordless products.
54
27 General Power Tool Safety Warnings
WARNING
■ Read all safety warnings, instructions, illustra‐
tions and specifications provided with this
power tool. Failure to follow all instructions lis‐
ted below may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
The term "electric power tool" in the safety warn‐
ings refers to mains-operated (corded) power
tools or battery-operated (cordless) power tools.
27.2 Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
27.3 Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed (groun‐
ded) power tools.Unmodified plugs and
matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entan‐
gled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location
f)
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
0458-041-9601-A