Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Holding a call / brokering
While a call is in progress, it is possible to dial another handset in
order to consult with someone. The external caller is put on hold while
you converse with the second, internal person called. You can repeat
this procedure as often as required.
HS1: M, e.g. 2
HS2: F
HS2: I
Making conference calls
An external call can be transferred to include another internal handset
for a conference call.
When an external call is in progress:
HS1: M
HS1: - / + INTERCOM Select the submenu and
M
HS1: ë e.g. 2
HS2: F
HS1: Hold down *
HS1/HS2: I
If the conference is ended by just one handset, the other
handset remains connected to the external caller.
Dial the internal handset number
while making the external call
Take the internal call on the other
handset
Switch between the callers
Open the main menu
confirm it
Dial the number of the handset
required
Take the internal call on the other
handset
Start the conference
End the conference
Displaying the duration of a call
Approximately 15 seconds after a telephone conversation starts, the
duration of the call appears in the display in hours, minutes and sec-
onds. When the call is ended, the call time remains in the display for
5 seconds.
Setting the receiver volume
The volume can be adjusted to one of 5 levels during a call.
+ or -
Handsfree
124
This function is used to listen to the caller via the loudspeaker.
L
L
Use the arrow up and down buttons to set the handsfree vo-
lume to one of five levels; . Setting the receiver volume".
Muting the microphone in the handset
The microphone in the handset can be activated and deactivated dur-
ing a telephone conversation. The caller can no longer hear you when
you consult with someone.
C
C
Telephoning
Select the required volume level
Enable handsfree talking
Disable handsfree talking
125
Deactivate the microphone
(muting function on)
Activate the microphone
135
Werbung
