General Requirements - Airzone EASYZONE AZCE6THINKRB Installationsanleitung

GENERAL REQUIREMENTS

Strictly follow the directions outlined in this manual:
·
This system must be installed by a qualified technician.
ES
·
Make all the connections with total absence of power.
·
Set and connect the elements in accordance with the electronic regulations in force.
EN
·
In order to connect the elements of the system, use the Airzone cable: shielded twisted cable formed by 4 wires
(2x0.22 mm
FR
·
Do not connect the "-" pole in the "+" terminal. It may damage the device.
IT
·
Do not place the system bus close to lines of force, fluorescent lights, motors, etc. It might cause interference on
communications.
PT
·
Follow these recommendations to locate the thermostats:
DE
Important: According to the current local and national regulations, it is mandatory to add a switch (or other element to
disconnect the system) to the external supply wiring so that a constant separation between poles is guaranteed. The system
will restart automatically if the supply is eventually turned off.
26
2 + 2x0.5mm 2 ).