5-Menu; Patient - Resonance R07A Benutzerhandbuch

5. Menu
To access the R07A Menu press ON/OFF switch when you are on the Test execution modality. To
browse up or down in the Menu, rotate either knob.
Entering this menu you can set or select:

Patient

Setup
Frequencies
Calibration (for trained personnel only)
About
5.1 Patient
To access the R07 Patient management, enter on Menu then select the associated function by pressing
F2 soft key or pressing one of the two knobs.
Rotating the knob, you can toggle through a list of 50 patients available.
The patients are identified only by a progressive number.
Once a patient is selected, three options are available:
F1- DELETE The data stored to this patient will be deleted and removed from the internal database.
Please confirm if you want to delete data pressing F2 before exit.
F2- SELECT If the patient is in "FREE" condition, pressing on the F2 soft key, the test result record will
be activated related to the selected patient. The patient ID number will be display on the test screen.
F2- VIEW If the patient is in "USED" condition, pressing the F2 soft key, all the stored results can be
viewed. Rotating the knob all the frequencies can be viewed.
Pressing EXIT the device will exit to the previous menu without saving any new selection.
42