Panasonic ES-LV69 Bedienungsanleitung Seite 17

4
Clean with running water�
• Splashing is reduced by rinsing
the shaver in sonic vibration
cleaning mode.
• Clean the system outer foil in
the areas indicated by the
circles.
• After rinsing with water, shake the
shaver up and down for a few times
to remove excess moisture and
then wipe off any drops of water
with a dry cloth.
5
Dry the outer foil section,
the shaver, and the
trimmer [A] completely.
• Allow the shaver to dry in the
shade, avoid direct sunlight.
6
Lubricate the shaver�
It will keep the movement of the
blades smooth and maintain a
comfort shave.
1. Apply one drop of oil to each
of the system outer foils.
2. Raise the trimmer and apply a drop of oil.
3. Switch the shaver on, and run it for approximately
five seconds.
4. Switch off the shaver, and wipe off any excess oil
from the system outer foil with a soft cloth.
Notes
• Do not use any kitchen or bathroom detergents other
than hand soap.
Doing so may cause malfunction.
• Be careful not to hit the main body on the sink or any
other object while draining the water. Failure to do so
may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, cracking or
discoloration of the parts.
Wipe with diluted soapy water.
Replacing the system outer foil and
the inner blades
system outer foil
inner blades
►Removing the outer foil section
Press the foil frame release buttons [A4]
and lift the outer foil section [A8] upwards.
►Attaching the outer foil section
After turning the foil frame mark (
front, securely attach the outer foil section
[A8] to the shaver until it clicks.
once every year
once every two years
) to the
17