Panasonic ES-LV69 Bedienungsanleitung Seite 14

How to use
Shaving beard
1
Press and shave�
• The "shaving sensor", which
automatically adjusts the power
depending on the beard thickness,
will operate.
It will shave with high power on areas
where the beard is heavy, and reduce
the power on areas where the beard
is thin, to reduce burden on the skin.
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin
and shave by slowly gliding the
shaver over the face against the
grain of the beard.
• The beard under the chin and
around the throat can be shaved
better by stretching the skin so
the beard will stand.
• To prevent damaging the system
outer foil, do not shave with only
a part of the system outer foil.
14
2
Press when finished.
While using
The remaining battery
capacity are shown and
then turn off after
5 seconds.
• Approximate amount of
battery capacity is
displayed as 20 – 100.
• The shaving sensor
lamp ( ) blinks.
When the battery capacity is low
"20" blinks when operating the shaver.
• You can shave 2 to 3 times after "20" blinks.
(This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C.
• The shaving sensor may not respond depending on the
type and quantity of the shaving gel. This is not abnormal.
After use
The remaining battery
capacity blink and then
turn off after 5 seconds.