Motorola PMLN6521 Installationsanleitung Seite 17

CABLING
To avoid visual or physical obstruction, route the cables down inside
the door moulding and beneath the carpets and seat(s). Allow
sufficient slack at the connector ends of the cables to reach the
duplexer or cradle connectors.
See Figure 10 before routing or connecting the cables.
1. Connect the 5 m MFME RG174 cable to the antenna GPS
connection.
2. Connect the 5 m FME RG58 cable to the antenna TETRA
connection.
3. Connect the 5 m FME RG174 cable to the duplexer "GPS" input.
4. Connect the 5 m FME RG58 cable to the duplexer "COMMS
ANTENNA" input.
5. Connect DC adapter cable (FTN6790) to 12 V supply.
6. Connect the 1 m FME cable from the duplexer "CAR KIT" input
to the cradle's RF cable.
15