Miele PTD 701 Kurzanleitung Seite 37

6.4 Replacing the canister
Warning
Risk of chemical burns when handling chemicals
Ø
Ø
Note: Only for machine with external canisters.
A suction tube is needed to suck out the chemicals from the canisters.
– Do not place the suction tube for the rinse aid in the canister with detergent or vice
versa.
– Only use the suction tube with sufficiently stable canisters. Narrow and tall canisters
can tip as soon as the suction tube is pulled.
– Do not pull on the dosing hose or main power cable, as this may lead to a defect.
Ø
Wear protective clothing, protective gloves and protective goggles.
Ø
Pull the suction tube carefully out of the empty canister.
Ø
Check whether both vent holes (1) in the cover cap are open. Clean if
required.
1
1
Ø
Place suction tube in the new canister.
Ø
Slide the cover cap slowly downwards until the canister opening is
closed.
Ø
Prime the dosing device.
Priming the dosing devices
The dosing device must be primed if air has entered the dosing hose. This occurs if the
canister is not replaced in time.
Item Description
1 Rinse aid dosing device
2 Detergent dosing device
Ø
Press button 1 or 2.
ð The button turns white.
ð The dosing device is primed.
Ø
As soon as the button goes off again, exit the menu.
Quick guide PTD 701, PTD 702, PTD 703, PTD 704
Observe the danger and safety notes on the canister and safety data
sheet.
Wear protective clothing, protective gloves and protective goggles.
1
2
|
11208000/02; 2023-07
6 Cleaning and maintenance
|
|
English
37