Miele PTD 701 Kurzanleitung Seite 35

Cleaning the warewasher interior
Ensure that there are no rusty foreign objects in the interior of the warewasher, which
could cause even "rust-free stainless steel" to corrode. Rust particles can come from non-
rust-free wash items, from cleaning aids, damaged wire grate racks or from water pipes
that are not protected against rust.
To achieve an optimal wash result and to increase the service life of the warewasher, we
recommend cleaning the interior daily.
Ø
Remove dirt with a brush or cloth.
Cleaning the outside of the warewasher
Ø
Do not spray the warewasher and the surrounding area (panels, floor) with a steam jet
or high-pressure cleaner.
Ensure when cleaning the floor that the plinth of the warewasher is not flooded, to pre-
vent an uncontrolled inflow of water.
Ø
Clean the display with a damp cloth.
Ø
Clean the external surfaces using a stainless steel cleaner and stainless steel polish.
Cleaning the upper and lower wash field
After cleaning
6.2 Topping up the regeneration salt
Note
Damage to the water softener
Chemicals such as detergent or rinse aid and other salts such as table salt
or thawing salt will inevitably damage the water softener.
Ø
Ø
Only fill with water when commissioning the water softener for the first time.
Ø
Top up the regeneration salt.
Ø
Note: Danger of rust formation in the filling area as a result of salt residues!
After filling the regeneration salt, start a washing programme or the self-cleaning pro-
gramme in order to wash away any salt residues that may be present. We recommend
starting the self-cleaning programme, as salt residues can have a negative impact on
the wash result.
Quick guide PTD 701, PTD 702, PTD 703, PTD 704
Fill only with regeneration salt or a pure evaporated salt with a max-
imum grain size of 1-4 mm.
6 Cleaning and maintenance
|
11208000/02; 2023-07
|
English
|
35