4
Operation
4.1 Switching on the warewasher
The warewasher is ready for operation as soon as the start button lights up white.
4.2 Checking for completeness
Note: Ensure that there is always enough detergent and rinse aid available to
achieve an optimum wash result.
4.3 Washing
Caution
Risk of scalding from hot wash water
Ø
Ø
– Do not wash without a wash rack.
– Do not wash electrical cooking appliances.
– Do not wash parts made of wood.
– Do not wash ashtrays or objects covered with wax.
– Only wash heat-resistant plastic parts and those resistant to alkalis.
Instructions for a good wash result
– Soak the cutlery until it is clean. Do not use any foaming pre-cleaners.
– Do not polish glasses, cutlery or dishes. Germs and bacteria can be found even in
fresh multi-purpose cloths.
– Wash parts made of aluminium, e.g. pots, containers or trays, only with a suitable de-
tergent to avoid black discolouration.
Quick guide PTD 701, PTD 702, PTD 703, PTD 704
Do not open the door during washing.
Before opening the door, terminate the washing programme by press-
ing the start button and wait a few seconds.
4 Operation
|
11208000/02; 2023-07
|
English
2 s
|
29