Miele PTD 701 Kurzanleitung Seite 32

|
English 5 Notifications
5 Notifications
5.1 Pictograms
Notifications are displayed as pictograms. If there are many notifications, washing will still
be possible but the end wash result will be impaired. Please therefore rectify any notifica-
tion as soon as possible. If you cannot rectify the notification, contact an authorised ser-
vice technician.
By tapping the pictogram, additional information will appear on the display.
Cause / meaning
Lack of rinse aid
Lack of detergent
Upper wash field does not rotate
Lower wash field does not rotate
For warewashers with an integ-
rated softener:
lack of salt
Warewasher with external partial
demineralisation cartridge:
partial demineralisation cartridge
used up
Warewasher with external full de-
mineralisation cartridge:
full demineralisation cartridge used
up
Open the door
Lack of water
Energy optimisation active
Service interval expired
Strainer clogged
32
|
11208000/02; 2023-07
Remedy
Refill the integrated storage tank (} page 36) or
replace the canister (} page 37) and prime the
dosing device.
Remove the obstruction or clean or descale the
jet (} page 34).
Contact an authorised service technician.
Ensure the wash field is engaged correctly.
Remove the obstruction or clean or descale the
jet (} page 34).
Contact an authorised service technician.
Fill the salt container with regeneration salt. The
display disappears after filling the salt container
after approx. 3 wash cycles have been com-
pleted and some of the salt has dissolved.
Replace the partial demineralisation cartridge.
Reset the water countdown meter.
Have the resin of the full demineralisation cart-
ridge replaced by an authorised service techni-
cian. Reset the water countdown meter.
Close the door.
Open the water supply.
Have the dirt trap cleaned by a service techni-
cian or have a new dirt trap installed.
Have the solenoid valve repaired by an author-
ised service technician.
Wait until the local energy optimisation activates
the warewasher.
Contact an authorised service technician.
Clean the strainer and restart the programme.
|
Quick guide PTD 701, PTD 702, PTD 703, PTD 704