Albrecht DB 275 Dualband Bedienungsanleitung Seite 62


Press[6] - "SρVE" appears and the actual status (ON or OFF) is shown. Repeat operation
to change status.

Function is not used under Channel Mode.
1.8 ANI Automatic Number Identification
Follow the steps for setting ANI on /off:

Press [MENU] - "εenu"Νappears, next like is blank.

Press[7] - "SρVE" appears and actual status (On or OFF) is shown. Repeat operation to
change status.

Function not in use under Channel Mode.
1.9 HIGH/LOW POWER Selection
This function is for the setting of transmitting power.

Press [MENU] - "εenu"Νappears, next line remains blank.

Press[8]- "θηWER" appears and present status (High or Low) is shown. Repeat operation
to change power.

Setting is separately used in frequency ranges A/B, not in use under Channel Mode.