Information Display Messages (Mod. 740Iox; 540Ix); Start Engine - Stiga Park 4WD Serie Gebrauchsanweisung

(Translation of the Original Instructions)
Clean the air filter
Replacing the air filter
Replacing the spark plugs
Clean the engine air intak
*** Interventions which must be carried out by your dealer or an authorised assistance centre
(1) 50 hours for original black B&S filters - 100 hours for high efficiency yellow B&S filters.
(2) Clean more frequently when operating in particularly demanding conditions or when there is debris in
the air.
14 INFORMATION DISPLAY MESSAGES (Mod. 740IOX; 540IX)
MESSAGE
CHECK CONNECTION
NO MOVING

START ENGINE

PRESS BRAKE
SIT DOWN
TILT FAULT
All manuals and user guides at all-guides.com
ENGLISH
ACTION / POSSIBLE CAUSE
An attempt has been made to start the
rear accessory (14:L). No accessory is
connected to the socket (17:A).
The plug is connected to the socket
but the message persists.
An attempt has been made to adjust
the rear accessory (14:I; 14:H). No ac-
cessory connected to the socket (17:B).
The plug is connected to the socket
but the message persists.
An attempt has been made to engage
the PTO with the engine switched off.
An attempt has been made to start
the engine with the parking brake off.
An attempt has been made to start the
engine with no-one in the driver's seat.
Tilt sensor malfunction.
This text runs twice:
- when the clinometer fails.
- each time the machine is started up,
after the initial indicator check runs on
the display
- 100 hours
400 hours /
100 hours /
8 hours /
Connect the plug on the accessory
to the socket on the machine.
Contact an authorised assistance
centre.
Connect the plug on the accessory
to the socket on the machine.
Contact an authorised assistance
centre.
Start the engine.
Put the parking brake on.
Sit in the driver's seat.
Contact an authorised assistance
centre.
EN
9.9.3 (2)
every season
every season
every season
REMEDY
25