FAR KJ 45 Bedienungsanleitung Seite 16

WORKING PROBLEMS (fi g. f7-f8-f9)
When the conditions require a forced unscrewing of the tie rod from the
insert, act as follows:
remove the push rod (P) from its seat (f7) and introduce it into the hole in the
lower part of the tensile-strength button (D) pushing it slightly.
ATTENTION! Carry out this operation keeping the riveting
tool fi rmly in order to avoid sharp movements which could
damage people or things (f8).
When the tie rod is free from the insert, put the rod back in its seat for not
loosing it (f9).
16
GB
P
D
P
f7
Date 04-2015
P
KJ 45
f8
P
f9
Revisione - 05