Structure And Equipment - Vortice VORT HRW 40 MONO EVO WiFi Betriebsanleitung

ENGLISH

Structure and equipment

Components common to all models
The main components of the device are:
• main body (1) already assembled which includes:
- Body with pre-assembled plug-in terminal block, frontal grille and aesthetic panel in polycarbonate (PC) tested
according to standard UNI EN ISO 11925-2:2010 and resulted in class E for reaction to fire (according to the
EN 13501-1 standard).
- Motor holder and push-button panel in ABS material.
- 5-speed reversible EC fan.
- Integrated electronic board.
- Closing device (disk) sealing the front panel to prevent temperature changes in the winter months and the entry
of pollutants and odors from the outside.
- Washable internal filter with frame.
• Flange (2) wall mountable with pre-assembled terminal block.
• T erminal block cover with screw and cable gland (3).
• PVC pipe for installation inside walls with thickness from 260 mm (283 mm VORT HRW 40 MONO EVO WiFi)
to 700 mm (optional).
VORT HRW 30 MONO EVO WiFi
• Storage type heat exchanger, made of ceramic material with external filter already assembled (4A)
• External ventilation grille (d.100 T10 RB) in plastic material, externally mountable. Grid equipped with anti-insect
net (5A).
VORT HRW 40 MONO EVO WiFi
• Storage type heat exchanger, made of ceramic material supplied with two expanded polyproylene (EPP)
housings and it is complete with a central gasket to prevent air infiltration (4B).
• Outer rubber grille (5B), which can be mounted externally with plugs or inserted internally through the hole in
the wall with no need for external scaffolding.
• Washable external filter with holder grids (x2) (6)
• Insect grid (7)
VORT HRW 30 MONO EVO HCS WiFi / VORT HRW 40 MONO EVO HCS WiFi
• Remote control (8).
VORT HRW 30 MONO EVO WiFi
(1)
(3)
(5A)
30
(2)
(4A)
(8)
(HCS models)
VORT HRW 40 MONO EVO WiFi
(1)
(2)
(5B)
(4B)
(7)
(8)
(HCS models)
(3)
(6)