Structure And Equipment - Vortice Vort HRW 60 Mono Evo HCS Betriebsanleitung

ENGLISH

Structure and equipment

The principal components of the device are (fig.2):
The main components of the device are:
• main body (1) already assembled which includes:
- body with pre-assembled plug-in terminal block, front grille and aesthetic panel in polycarbonate (PC) tested
according to standard UNI EN ISO 11925-2:2010 and resulted in class E for reaction to fire (according to
the EN 13501-1 standard);
- motor holder and push-button panel in ABS material;
- 5-speed reversible EC fan;
- Integrated electronic board;
- closing device (disk) sealing the front panel to prevent temperature changes in the winter months and the
entry of pollutants and odors from the outside;
- washable internal filter with frame;
• flange (2) wall mountable with pre-assembled terminal block;
• terminal block cover with screw and cable gland (3);
• PVC pipe for installation inside walls with thickness from 283 mm to 700 mm (optional);
• storage type heat exchanger, made of ceramic material supplied with two expanded polyproylene (EPP)
housings and it is complete with a central gasket to prevent air infiltration (4B);
• outer rubber grille (5B), which can be mounted externally with plugs or inserted internally through the hole in
the wall with no need for external scaffolding;
• washable external filter with holder grids (x2) (6);
• insect grid (7);
• remote control (8).
2
(1)
(4B)
(7)
(2)
(3)
(5B)
(6)
(8)
27