Introduction; Proper Use; Features; Package Contents - Parkside PDMS A1 Bedienungsanleitung

MINI AIR POLISHER PDMS A1

Introduction

Congratulations on the purchase of your
WARNING!
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important in-
formation about safety, use and disposal.
GB
Before using the product, familiarise yourself with all
operating and safety instructions. Use this product
only as described and only for the specifi ed areas
of application. Please also pass these operating
instructions on to any future owner(s).

Proper use

The mini air polisher (hereinafter referred to as
"Appliance" / grinder) is suitable for grinding and
deburring of metal. Any other uses of or modifi ca-
tions to the appliance are deemed to be improper
usage and may result in serious physical injury. Not
for commercial use.

Features

Clamping chuck
Mini air polisher
Speed setting wheel
Compressed air hose
Threaded connector 1/4"
Installation spanner SW 9
Tefl on tape
Threaded connector 1/4"
Mini compressed air oiler
Female threaded connector 1/4"
Crosshead screw for oil fi ller opening
Compressed air connector plug
Threaded nipple 1/4"
Oil bottle
Whetstone
22

Package contents

1 mini air polisher
2 installation spanners SW 9
1m Tefl on tape
1 compressed air oil container
1 compressed air connector plug
1 mini compressed air oiler
10 whetstones
1 transport case with inspection window
1 operating instructions

Technical details

Rotational speed: 0 - 54000 rpm
Working pressure: max. 6.3 bar
Chuck capacity 3.2 mm
Airfl ow: 200 l/min
Air inlet: 1/4"
Housing material: Aluminium
Weight
(mini air polisher
with hose): approx. 175 g
Sound pressure level:
Sound power level:
Uncertainty K:
Measured values determined in
accordance with: ISO 15744, ISO 4871
Wear ear protection!
Vibration emission value = 0.744 m/s
Uncertainty K = 0.043 m/s
Measured values determined
in accordance with: ISO 28927-12,
EN 12096
79.0 dB(A)
90.0 dB(A)
3 dB
2
2
PDMS A1