Herunterladen Inhalt Inhalt Diese Seite drucken

Scheppach PRACTIXX PX-SE-2000 Originalbetriebsanleitung Seite 24

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Nevertheless, this information makes it possible
for the user to be able to make a better assess-
ment of the dangers and risks involved.
16. Never use a faulty or damaged electrical equip-
ment (this also applies to extension cables and
plug connections).
17. Never put any items into the ventilation openings.
This applies even when the generator is switched
off. Non-observance may lead to injury, or damage
to the generator.
18. Generating sets may only be loaded up to their
rated power under the rated ambient condition. If
generating set use is under conditions which do
not conform to the reference conditions as stipu-
lated in ISO 8528-8 and if cooling of the engine
or alternator is impaired, e.g. as a result of oper-
ation in restricted areas, a reduction in power is
necessary.
19. It is necessary reduction in power due to use in
higher temperatures, altitudes and humidity as be-
low conditions.
Max. Working temperature: 40 °C
Max. Altitudes: 1000 m
Max. Humidity: 90 %
20. Keep the generator free of oil, dirt and other im-
purities.
21. Ensure the sound absorber and air filter work prop-
erly. These parts serve as flame protection in case
of misfire.
22. Before connecting electric leads, the appliance
must reach its full speed. Disconnect leads before
switching off the motor.
23. To prevent injury by electric shock, ensure the fuel
tank is not completely empty while electric leads
are connected.
24. The load must not exceed the power marked on
the rating label of the generator. Overloading may
result in damage to, or a shorter life of the appli-
ance.
25. Do not connect the appliance to household outlets.
The generating set must not be connected to other
power sources, such as the power company sup-
ply mains.In special cases where stand-by con-
nection to existing electrical systems is intended,
it shall only be performed by a qualified electrician
who has to consider the differences between oper-
ating equipment using the public electrical supply
network and operating the generating set.
26. Stop the engine:
- whenever you leave the machine
- before refuelling
24 | GB
27. Always close the fuel valve when the machine is
not in operation.
28. Never use the choke lever to stop the engine.
Warning! This electric tool generates an electromag-
netic field during operation. This field can impair active
or passive medical implants under certain conditions.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the electric tool.
Safety informations service/ maintenance
1.
Only original parts may be used for maintenance
and accessories.
2.
Replace faulty silencers.
3.
Before using, always visually inspect to see that
the tools are not worn or damaged. Replace worn
or damaged elements and bolts. Keep all nuts,
bolts and screws tight to be sure the equipment is
in safe working condition.
4.
Regularly check for leakage or traces of abrasion
in the fuel system, such as porous pipes, loose or
missing clamps and damage to the tank or tank
cap. Before use all defects must be repaired.
5.
Before checking or adjusting the generator or the
motor, the ignition plug and the ignition wire re-
spectively must be removed to prevent acciden-
tal starting.
m WARNING!
Improper maintenance or ignoring/ not rectifying a
problem during the operation may become a source of
danger. Operate your machine only if regularly main-
tained. Only in this way you can assume that your de-
vice is operating safe, economical and without mal-
functions.
Do not clean, maintain, setup or repair the ma-
chine whilst running. Moving parts may cause se-
rious injuries.
Do not use fuel or other flammable solvents to clean
the equipment.
m WARNING! Vapours of fuels and solvents may ex-
plode.
Reaffix the security and safety equipment after repara-
tion and maintenance work.
Keep the machine in safe work condition. Especially
check the fuel system for tightness.
www.practixx.com

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

39062259969

Inhaltsverzeichnis