Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
3
Technical Characteristics
3.1
Technical specifications
Dry diamond drill type
Manufacturer
Operating voltage (V / Hz)
Power consumption (watt)
Protection class
Speed (min
)
-1
Core drill bit diameter, hand-guided (mm)
Impact frequency (imp)
Bit holder
Weight (kg)
1)
Speed electronics
Sound measurement
2)
L
(sound pressure) dB (A)
pA
L
(sound power) dB (A)
WA
Vibration measurement:
Front handle (11)
1
Rear handle (2)
1
Weight according to EPTA procedure 01/2003.
1)
Measured values for noise determined according to EN 60745. Wear hearing protection!
2)
Total vibration values (vector sum in three directions) determined according to EN 60745
3)
The vibration emission values given in this instruction manual have been measured according to a method
of measurement standardised in EN 60745 and can be used for comparison between power tools. They
are also suitable for a preliminary estimate of the vibratory stresses.
The vibration emission values given represent the main applications of the power tool. If the power tool is
used for other applications, with different insert tools or are insufficiently serviced, this can significantly
increase the vibratory stresses over the whole work period. For a precise estimate of the vibration
emission values, the times during which the tool is switched off or is running but not actually in use should
also be taken into account. This can reduce the vibration stresses over the whole work period significantly.
WARNING
Health risk due to vibrations.
Î Additional safety measures should be taken to
protect the user, e.g. wearing anti-vibration pro-
tective gloves, correct maintenance of power
tools and insert tools, keeping hands warm and
good organisation of work sequences.
| 30 |
K = 3 dB
K = 1.5 m / s
3)
m / s
2
m / s
2
BDB 822AP
Maschinenfabrik OTTO BAIER GmbH
~230 / 50 / 60
1650
/ II
1800
40 – 90
35000
M18
5.0
Yes
91
99
2
4.9
BDB 823A
1800
/ II
1650
100 – 150
33000
M18
5.2
Yes
92
99
5.5
Werbung
Inhaltsverzeichnis
