Herunterladen Inhalt Inhalt Diese Seite drucken

About This Instruction Manual; Important Information; Symbols Used In The Instruction Manual; Safety Instructions - Baier BDB 823A Original Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
1
About this instruction
manual
This instruction manual contains all important
information necessary for safe handling of the dry
diamond drill.
The dry diamond drill is also referred to as the "tool"
or "machine" in this instruction manual.
Figure references
References to figures, which are located at the
beginning of the instruction manual are displayed in
the text with this symbol
reference is to Figure number 1).
1.1

Important information

Read the instruction manual
Before starting any work with or on the tool, this
instruction manual, the safety instructions and
the warnings must be read through carefully and
observed.
Always keep this instruction manual together
with the equipment.
An approved half-mask with filter must
be worn!
1.2
Symbols used in the instruction
manual
DANGER
"DANGER" indicates an imminent hazard, which
will result in immediate death or severe physical
injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
| 24 |
1
(here, for example, the
WARNING
"WARNING" indicates an imminent hazard, which
could result in death or severe physical injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
CAUTION
"CAUTION" indicates an imminent hazard, which
can result in minor or moderate physical injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
NOTE
"NOTE" indicates possible property damage, gives
use recommendations and helpful tips.
2

Safety Instructions

General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mainsoperated (corded) power tool or battery-op-
erated (cordless) power tool.
2.1

Workplace safety

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bdb 822ap

Inhaltsverzeichnis