Product Overview; Technical Data - AL-KO BC 330 MT Betriebsanleitung

Requirements for cutting blade / spool attachment:
Danger of injury to fingers and hands due to reaching
„
into the running cutting tool.
Danger of injury to the feet due to contact between the
„
cutting tool and uncovered areas.
Stones and soil being thrown out
„
Conditions for the polemounted pruner:
Danger of kickback if the tip of the guide rail touches a
„
solid object.
Danger of injury to the fingers and hands due to the
„
tool (saw chain).
Injury due to parts of the object being cut flying out.
„
Conditions for the hedge trimmer:
Injury due to parts flying out.
„
Breakage of blade segments, causing them to fly out.
„
Furthermore, in spite of all precautions being taken, there
may be concealed residual risks.

Product overview

The product overview (1) provides an overview of the
appliance. The version with the spool attachment is
shown.
Overview of parts
(1)
1 Petrol engine
2 Eye for carry strap
3 Throttle lever detent
4 Throttle lever
5 Ignition switch START/STOP
6 Hand grip
7 Split shaft attachment
8 Split shaft
9 Guard plate
10 Line cutter
11 Spool cover with spool
References to the figures in the illustrations are
made using the (Fig. no.).
(Fig. no. - work step no.) refer to work steps that
are shown in the illustrations.
30

Technical data

BC 330 MT (complete set)
Art. no.
Engine type
Displacement
Power
Dry weight (EN ISO
11806)
Operating weight
without petrol
Fuel quantity
Ignition
Spark plug
Drive
Handle
Sound power level (ISO
22868)
Sound pressure level
(ISO 22868)
Vibration (ISO 22867)
Line diameter
Line cutting width
Cutting blade cutting
width
Hedge trimmer cutting
length
Chain saw bar
Engine speed max.
Engine speed idling
Tool rotation speed
(Cutting blade)
Accessories:
Cutting blade
Spool
Chain
Original instructions for use
112942
2-stroke, air-cooled
32.6 cm³
1.1 kW
6.7 kg
7.5 kg
1.1 l
electronic
L8RTC
Centrifugal clutch
Bike handle
113 dB ±LpA 3 bdB
102 dB
≤ 15 m/s² uncertainty
K 2.25 m/s²
2.5 mm
41 cm
24 cm
39 cm
25 cm
9,500 rpm
2800 ±150 rpm
7,500 rpm
Art. no. 112405
Art. no. 112406
Art. no. 112972