Safety And Protective Devices; Product Overview (01); Scope Of Supply; Safety Instructions - AL-KO solo MT 42.2 Bedienungsanleitung

Safety instructions

2.5

Safety and protective devices

WARNING! Risk of injury. Defective and
disabled safety and protective devices can result
in serious injury.
■
Have any defective safety and protective de-
vices repaired.
■
Never disable safety and protective devices.
Overload protection
If the material to be cut is too thick or there is
contact with a hard object, the tool on the attach-
ment blocks and the motor switches off automati-
cally.
1. Switch off the appliance and remove the re-
chargeable battery.
Warning! Remove the battery before carrying
out any work on the appliance .
2. Clear the blockage.
3. Wait for around 5 seconds.
4. Then install the rechargeable battery again
and switch on the appliance.
Loop handle with spacer
The loop handle ensures that the operator's feet
do not get into the vicinity of the rotating cutting
line or blade.
2.6 Product overview (01)
No. Component
1 Coupling for shaft extension or attach-
ment
2 Spacer
3 Loop handle
4 Eye for carrying strap
5 Switch
6 Unlocking button for throttle lever
7 Throttle lever
8 Handle
9 Battery compartment
10* Rechargeable battery*
11* Charger*
12** Shaft extension MTA 42.2**
13** Carrying strap**
14 Operating instructions
443441_a
*: Not included in the scope of supply; can be
purchased separately.
**: Included in the scope of supply of the attach-
ment.
2.7

Scope of supply

No. Component
1 Basic appliance
2 Loop handle with spacer and attachment
parts
3 Operating instructions
3 SAFETY INSTRUCTIONS
3.1

General Power Tool Safety Warnings

WARNING! Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool. Failure to follow
all instructions listed below may result in electric
shock, fire and/or serious injury.
■
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
3.1.1

Work area safety

■
Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
■
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
■
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
3.1.2

Electrical safety

■
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of elec-
tric shock.
■
Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
19