Adjusting The Angle Of The Handlebar - ROSE SNEAK PLUS Betriebsanleitung

3.3

Adjusting the angle of the handlebar

1. Loosen the handlebar clamp bolts by turning them anti-
clockwise until the angle of your handlebar can be adjusted.
2. Centrally align the handlebar and adjust the angle.
→ Adjusting the handlebar angle has an effect on the light beam
of the front light integrated in the handlebar.
→ Adjust the handlebar angle so that the centre of the light
beam on a wall 5 m away is at about half the mounting height
of the handlebar.
3. Tighten the bolts of the handlebar clamp alternately in small
increments until you have reached the tightening torque.
For the required tightening torque see the stem of your bike or
chapter "8.4 Torques" on page 57.
5 m
41