Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning The Accessories; Cleaning In The Dishwasher - Silvercrest MONSIEUR CUISINE SKMH 1100 A1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MONSIEUR CUISINE SKMH 1100 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 149
RP93471 Küchenmaschine mit Heizung LB3 Seite 20 Donnerstag, 14. August 2014 3:34 15
2. Half fill it with hot water.
3. Put the lids for the blender jug 25 and its
fill opening with measuring scale 26 in
place.
4. Insert the power supply plug into a
suitable mains socket (see "3. Technical
data" on page 3).
5. Press the pulse button briefly several
times 9.
6. Take the jug 6 off the appliance.
7. Pour away the water.
The blender jug 6 is now pre-cleaned.
8. Remove the blade assembly 20 (see
"7.2 Inserting and removing the blade
assembly" on page 11)..
9. Clean the blender jug 6 by hand in the
sink with soapy water.
10.Then rinse it 6 thoroughly under clear
water.
11. Allow the jug 6 to dry completely before
using it again.

10.3 Cleaning the accessories

Warning! The blade assembly
20 has very sharp blades. To
avoid injury, please observe the
following information:
• Remember that the blades of the
assembly 20 are extremely sharp.
Never touch them with your bare hands
to avoid cutting yourself.
• When washing up by hand, the water
should be clear enough that you can
easily see the blade assembly 20 and
do not risk cutting yourself on its
extremely sharp blades.
1. Remove the blade assembly 20 from the
blender jug 6 (see "7.2 Inserting and
removing the blade assembly" on
page 11).
20
2. Remove the seal 19 from the blade
assembly 20.
3. Remove the seal 24 from the lid of the
blender jug 25.
4. Remove the seal 5 from the drip tray 4.
5. Clean all the accessories by hand in the
sink.
6. Allow all parts to become completely
dry.
7. Replace the seal 5 in the drip tray 4.
Note: The seal for the drip tray 5 must
be mounted in such a way that the label
"BACK" is no longer visible.
8. Replace the seal 24 in the lid of the
blender jug 25.
Note: The seal 24 in the lid of the
blender jug must be positioned so that
the smooth side is inwards.
9. Replace the seal 19 in the blade
assembly 20.

10.4 Cleaning in the dishwasher

The following parts are suitable for cleaning
in a dishwasher:
• blender jug 6
• lid for blender jug's fill opening with
measuring scale 26
• lid for blender jug 25 without its seal 24
• blade assembly 20 without its seal 19
• cooking pot 21
• mixer attachment 22
• spatula 23

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis