Preset Mode; Master/Slave Mode; Cleaning And Maintenance; Replacing The Fuse - EuroLite LED Theatre 36x3W CW/WW Theatre Spot Bedienungsanleitung

PRESET MODE

Press the MODE button to select the PRESET mode. Select the desired presets color temperatures (CT:1 –
CT from 01 to 17, from warm white to cold white.
Flash from 01 to 99, increasing speed.
Please press the ENTER button to confirm and to exit the PRESET Mode.

MASTER/SLAVE MODE

The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the rear panel of the LED Theatre 36x3W CW/WW theatre spot you can find an XLR-jack and an XLR-
plug, which can be used for connecting several devices.
This device then works as master-device and controls the slave-devices, which are to be connected to the
Press the MODE button to select the SLAVE mode. The devices set in this manner can now be controlled by
the master unit.
Please press the ENTER button to confirm and to exit the SLAVE Mode.

CLEANING AND MAINTENANCE

Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
All manuals and user guides at all-guides.com
CT:17) via the UP or DOWN button.
Press the ENTER button to select flash speed, respectively.
You can select the desired values via the UP or DOWN
buttons.
master-device via a stereo shielded cable.
Connect the DMX OUT jack with the DMX IN plug of the next
device.
DANGER TO LIFE!
21/22 00058904.DOC, Version 1.1