Herunterladen Inhalt Inhalt Diese Seite drucken

Interference Suppression Time; Diagnostic Suppression; Temperature Detection - Balluff BMF 415KW-HA W-5-Serie Betriebsanleitung

Vorschau ausblenden Andere Handbücher für BMF 415KW-HA W-5-Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
BMF 415KW-HA _ _ _ -W-5- _ _ -...
Magnetic Field Sensors
6
IO-Link interface (continued)
6.5.3

Interference suppression time

When the BMF 415KW-HAKKI-... detects magnetic field
interference, the disturbance suppression time t
started. During this time the actual signal is ignored. This
prevents improper switching in the special case where the
magnetic interference field corresponds to the actual signal
of the piston at the switching point.
Index
Subindex Name
Disturbance
Suppression
0
Duration
0x0420 (1056)
Tab. 6-8:
Parameter interference suppression time
6.5.4

Diagnostic suppression

If diagnostic functions are causing problems in the
application, these functions can be suppressed.
(For diagnostic events implemented in the
BMF 415KW-HAKKI-... see section 6.6.2 Event list on
page 18).
Index
Subindex Name
Diagnosis
1
Suppression
Configuration
0x00F8 (248)
2
Tab. 6-9:
Parameter diagnosis suppression
6.5.5

Temperature detection

The temperature sensor detects the temperature inside the
BMF 415KW-HAKKI-... This is normally higher than the
ambient temperature.
Index
Subindex Name
1
2
Device
3
Temperature
0x0052 (82)
4
5
Tab. 6-10: Parameter temperature detection
www.balluff.com
is
DSD
Interference suppression
time
Suppression Level
PD Invalid Suppression
Current temperature
Minimum temperature
since start of operation
Maximum temperature
since start of operation
Minimum temperature over
the entire service life
Maximum temperature
over the entire service life
Size
Access
Values
50...1000 ms (0x0032...0x03E8)
2 bytes
Read/Write
Default = 600 ms (0x0258)
Size
Access
Values
0 = All events active (default)
1 = Messages suppressed
1 byte
Read/Write
2 = Messages and warnings
suppressed
3 = All events suppressed
0x00 (0) = PD Invalid active
1 byte
Read/Write
0xFF (255) = PD Invalid suppressed
Size
Access
Values
2 bytes
Read Only
2 bytes
Read Only
2 bytes
Read Only
Signed 16-bit value in units of °C
2 bytes
Read Only
2 bytes
Read Only
english
15

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis