D) Fm Operation - Renkforce Rf-Dab-Stereo1 Bedienungsanleitung

Calling station information
• Push the button MENU/INFO (2) briefly to display various information on the station you are
listening to, the power supply method used for the radio (incl. battery charge status if active)
or the time and date in the second line of the display (4).
• Push the MENU/INFO button (2) once more to move to the next display.
• The contents of the displayed station information depend on the station.
Further operating options can be found in the menu
• Push the button MENU/INFO (2) for a longer time to display the menu.
• The following menu items refer to DAB operation.
Full scan
Manual tune
DRC
Prune

d) FM Operation

Station search
• Push the button PREV. (10) or NEXT (5) briefly to change the reception frequency in steps
and manually. Every push of a button changes the reception frequency in steps of 50 kHz.
• Push the button Scan (8) briefly to start the station scan up or keep it pushed to start the
station scan down.
• If a FM transmitter with sufficiently strong signal is found, the scan stops and the transmitter
is played back.
Please set weaker stations by manual station selection.
Use the menu to set if the automatic station scan is to find only strong stations or all
stations. Scanning for all stations may lead to the station scan stopping after every
frequency stop in some broadcasting areas. In this case, set the search setting to
strong stations only.
Performs a scan (same function as when pushing the button SCAN (8)
Manual selection of the transmission frequency with display of the
signal strength (push the button SELECT/SNOOZE (9) for this)
This function compresses playback of sound to make low sounds
better audible at a low volume or loud environment.
Deletes inactive stations from the station list
35