Switch On The Automatic Heat-Up Function; How To Link Bridge Induction Zones - Pelgrim IDK894ONY Anleitung

OPERATION

Switch on the Automatic heat-up function

1. Switch on the hob and put a pan on the zone.
2. Press and hold a slider to select a power setting with auto heat-up function.
See 'Cooking time limiter'.
▷
Flashing A -> 4
Hold
How to link 'bridge' induction zones
1. Switch on the hob.
2. Press both left (or both right) flex zone sliders simultaneously to switch on the bridge zone.
3. Press the left (from the two bridged zones) slider to set a power level (for both linked zones).
max. level 9!
Deactivating the 'bridge' mode
1. Press both left (or both right) zone sliders simultaneously to switch off the 'bridge' zone.
EN 16