Herunterladen Inhalt Inhalt Diese Seite drucken

Transportation And Storage - Ryobi RST36B51 Übersetzung Der Originalanleitung

Vorschau ausblenden Andere Handbücher für RST36B51:
Inhaltsverzeichnis

Werbung

attempting to clear snow at too fast a rate.
Use the machine in a well-illuminated
area and look out for obstacles or hazards
illuminated by the machines headlights.
Do not use the product when there is a risk
of lightning.
Keep clear of the discharge opening at all
Do not operate the product in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Keep firm footing and balance. Do not
overreach. Overreaching can result in loss
of balance.
Always be sure of the footing on slopes
and walk, never run.
Do not modify the product in any way or
use parts and accessories which are not
recommended by the manufacturer.
while
the
motor
where
specifically
manufacturer.
WARNING
If the product is dropped, suffers heavy
impact or begins to vibrate abnormally,
immediately stop the product and inspect
for damage or identify the cause of the
vibration. Any damage should be properly
repaired or replaced by an authorised
service centre.
contacting rotating parts, always stop the
product, remove the battery pack, make
sure all moving parts have come to a stop:
before cleaning or clearing a blockage
before leaving the product unattended
before
checking,
maintenance, or working on the product
the product for damage
if the product starts to vibrate abnormally
OPERATION TIPS
The product will not operate if the upper
handle is not properly fitted and the handle
lock clip is not securely clipped. There are
two safety interlocks to help to prevent
accidental start when the machine is not
is
running,
except
recommended
by
conducting
correctly assembled.
Take notice of the direction of the wind
before operating the machine. Discharge
snow in the same direction as the wind to
prevent snow from being thrown back into
your face.
When finished, allow the motor to run for
an additional few minutes, then turn the
chute rotation lever back and forth several
times to remove any remaining snow from
the chute.

TRANSPORTATION AND STORAGE

Stop the machine, remove the battery
pack and allow it to cool before storing or
transporting.
Clean all foreign material from the machine.
Store it in a cool dry and well-ventilated
place that is inaccessible to children.
Keep away from corrosive agents such as
garden chemicals and de-icing salts. Do
not store outdoors.
For transportation, secure the machine
against movement or falling to prevent
MAINTENANCE
WARNING
Use
only
original
replacement
parts,
attachments. Failure to do so can cause
void your warranty.
WARNING
Servicing
requires
knowledge and should be performed only
product to your nearest authorised service
centre for repair. When servicing, use only
identical replacement parts.
described here. For other repairs, contact
the authorised service agent.
After each use, clean the machine with a
soft dry cloth.
Check all nuts, bolts and screws at frequent
intervals for proper tightness to ensure the
machine is in safe working condition. Any
manufacturer's
accessories
and
extreme
care
and
English |
3
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis