Panasonic AW-E750 Handbuch Seite 48

Colour Set Display
7
1. Chroma Level Adjustment [Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to
three levels.
2. White Balance Setting
[White Bal: ATW, AWC A, AWC B, P SET 3 200K,
P SET 5 600K]
ATW: The white balance is automatically adjusted to
the optimum position.
AWC A, AWC B: Colour temperature conditions at
two points can be stored at AWC A and AWC B.
Once the white balance is adjusted with the
ITEM/AWC switch on the back of the camera, it is
no longer necessary to set the white balance
again if you simply select AWC A or AWC B,
provided that the camera is used under the same
conditions.
Fine colour adjustment can be made after setting
AWC by red/blue gain adjustment in Painting
Setting or from the RCU (RCB).
P SET 3 200K: The white balance is adjusted to
3 200K illumination.
P SET 5 600K: The white balance is adjusted to
5 600K illumination.
Note
Neither P SET 3 200K nor P SET 5 600K can be
set from the RCU (RCB) or the hybrid control
panel.
3. ATW Speed Setting
[ATW Speed: SLOW 2, SLOW 1, MID, FAST 1, FAST 2]
ATW Speed can be set.
4. Black Level Setting [Pedestal: –150 to +150]
The black level (pedestal) of the luminance (Y) signal
can be set. Used in adjusting the black levels of two
or more cameras.
5. Painting Setting
[Painting: R Gain, B Gain, R Pedestal, B Pedestal:
–150 to +150]
R Gain, B Gain: Fine adjustment of the white bal-
ance can be made after AWC setting when AWC
A or AWC B is selected in White Balance Setting.
In case of using the RCU (RCB), use the R/B gain
controls for this purpose. The set value returns to
±0 after AWC setting in using the camera alone.
R Pedestal, B Pedestal: Fine adjustment of the
black balance can be made after ABC setting.
In case of using the RCU (RCB), use the R/B
pedestal controls for this purpose. The set value
returns to ±0 after ABC setting in using the cam-
era alone.
-47 (E)-
R/B Gain
Control
R/B Pedestal
Control
RCU (RCB)