Panasonic AW-E750 Handbuch Seite 27

GEN-LOCK ADJUSTMENT
Phase adjustments must be performed with the camera
or the RCU (RCB) when external synchronizing signals
are supplied to the system in cases where multiple cam-
eras are used or peripheral devices are connected.
HORIZONTAL PHASE CONTROL
Observe the waveform of the external synchronizing
input signal (black burst signal) and video output signal
on a two-channel oscilloscope. Then match the horizon-
tal phase of both signals by adjusting them with the
cameras or RCU's horizontal phase control.
Adjust the horizontal phase
[ADJUSTMENT by CAMERA]
1. Press the NO/BAR switch for over 5 seconds to dis-
play the colour bar.
2. Select [G/L Adjustment] on the main menu, then
select [H PHASE] on the submenu.
3. Adjust the horizontal phase with the YES/ABC and
NO/BAR switch.
External gen-lock input signal
(black burst output of special
effect generator)
Video signal
**G/L Adjustment Set**
H Phase
SC Coarse
SC Fine
Return
[ADJUSTMENT with RCU (RCB, Hybrid control panel )]
Use the horizontal phase control.
Horizontal phase
control
-26 (E)-
OPTION CARD
VIDEO OUT
(±0)
I/F REMOTE
MENU
( 1)
G/L IN
ITEM/AWC
(±0)
YES/ABC
IRIS
NO/BAR
DC12V IN
NO/BAR Switch
YES/ABC Switch
Subcarrier phase
fine control
Subcarrier phase
coarse control