Panasonic AW-E750 Handbuch Seite 11

7. MENU Switch (MENU/A)
A menu will appear on the monitor screen when this
switch is pressed for about 5 seconds. This item
can be selected by pressing the switch while the
menu is on the screen.
8. ITEM/AWC Switch (ITEM/AWC/S)
The item just below can be selected by pressing
this switch while the menu is on the screen. When
the menu is not displayed or the camera is in shoot-
ing mode, the automatic white balance control can
be set with this switch.
9. YES/ABC Switch (YES/ABC/+)
The Sub Menu for each item of the Main Menu is
displayed when this switch is pressed while the
Main Menu is on the screen.
While the Sub Menu is displayed, any setting can be
brought up to a higher value with this switch. When
the menu is not displayed or the camera is in shoot-
ing mode, the automatic black balance control can
be set with this switch.
10. NO/BAR Switch (NO/BAR/−)
The item just below can be selected by pressing
this switch while the Sub Menu is on the screen.
While the Sub Menu is displayed any setting can be
brought down to a lower value with this switch.
When the menu is not displayed or the camera is in
shooting mode, the colour bar and the shooting
conditions are indicated by pressing the switch.
11. Video Output Connector (VIDEO OUT)
A composite video signal is provided at this connec-
tor.
12. Iris Connector (IRIS)
Input terminal for lens with an iris control function.
Pin No.
1
2
3
4
5
6
13. Zoom/Focus Connector (ZOOM/FOCUS)
(model AW-E655 only)
This connector is for the remote cable of the lens
and is a standard input connector for lenses with
remote functions for zooming and focusing.
When the camera is to be mounted on a Panasonic
pan/tilt head (such as the AW-PH300A), do not use
this connector — connect the remote cable of the
lens to the LENS I/F connector on the pan/tilt head
instead.
-10 (E)-
Signal Pin No. Signal
Return Control 7 Iris Follow
Not Used 8 Auto/Remote Control
GND 9 Not Used
Auto/Manual Control 10 Not Used
Iris Control 11 Not Used
Lens Power 12 Not Used