JUMO dTRANS T01 Ex Betriebsanleitung Seite 64

10 IECEx Certificate of Conformity
Certificate No.: IECEx ZLM 14.0011X
Date of issue: 2023-04-27
Manufacturer: JUMO GmbH & Co. KG
Moritz-Juchheim-Straße 1
36039 Fulda
Germany
Manufacturing
locations:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in IECEx Scheme
Rules, IECEx 02 and Operational Documents as amended
STANDARDS :
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards
IEC 60079-0:2011 Explosive atmospheres - Part 0: General requirements
Edition:6.0
IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
Edition:6.0
IEC 60079-26:2006 Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga
Edition:2
This Certificate does not indicate compliance with safety and performance requirements
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:
Test Report:
DE/ZLM/ExTR14.0011/01
Quality Assessment Report:
DE/EPS/QAR23.0003/00
IECEx Certificate
of Conformity
other than those expressly included in the Standards listed above.
30
Page 2 of 4
Issue No: 2