Inhaltsverzeichnis
Werbung
the safety valve examined by your dealer.
Do not work with the compressor when the safety valve
does not work properly, as described above.
GENERAL INSPECTION
1 Regularly check all the fixing bolts for their tight seat.
2 Regularly check, at short intervals, the electric cable
for damages. A damaged cable must be replaced by an
electrician in order to avoid any danger.
CLEANING
1 Always keep the air inputs and outputs free and clean.
2 Regularly remove dust and dirt with a soft brush or a
soft cloth.
3 Regularly grease all moving parts.
4 When the compressor must be cleaned, wipe it with a
soft, moist cloth. A mild rinsing agent may be used, but
no alcohol, gasoline, or another cleaning agent.
5 Never use any caustic agents for cleaning plastic parts.
Attention: Water may never come into contact with the com-
pressor.
m Electric connection
Maintenance of the electric cable
The cable set may only be repaired or replaced by a spe-
cialized workshop. In case of damage, contact your dealer.
BA HC 52dc.indd 27
international 27
09.02.12 11:04
Werbung
Inhaltsverzeichnis
