Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
Setting up
3.1
Safety information
NOTE: Before setting up, it is essential that you read the Safety Information at the
beginning of this operating manual.
3.2
Check contents of pack
The following items are supplied:
one base station with plug-in mains power
supply
one mobile unit with plug-in mains power
supply
one instruction manual
3.3
Connecting the base station
Position the base station near to your telephone connection socket and to a mains
socket.
1.
Insert the small round plug of the power supply (7V, 400mA) without adapter into
the socket on the rear of the base station and plug the power supply into a properly
installed 230 V mains socket. The plug-in power supply for the base station must
always be connected. For safety reasons, use only the plug-in mains power supply
provided.
2.
Connect the telephone cable supplied to the telephone socket and the telephone
jack on the rear of the base station. Use only the new telephone cable provided.
3.4
Fitting the battery in the mobile unit
1.
To fit the rechargeable battery supplied into
the mobile unit, open the battery
compartment on the underside.
2.
Connect the battery cable. The plug is
provided with polarity protection so that it
cannot be inserted the wrong way round.
3.
Place the battery in the compartment and close the cover.
Important note: If you want to use the mobile unit without a cable, the battery must be
charged for at least 15 hours. See Chapter 3.5. The telephone may malfunction if the
batteries are not properly charged.
- Setting up -
one telephone connecting
cable
one battery 7.2V, 1800mAh
27
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
