Removing The Packaging; Conveying The Appliance - Gaggenau IK 30-254 Serie Montageanweisung

30
All manuals and user guides at all-guides.com
Removing the Packaging, Stabilising the
Appliance

Removing the packaging

Remove the straps secured around the cardboard
box. Open the box at the side and remove it.
The stabilisers 1 must then also be removed
(fig. 1).
The stabilisers are screwed onto the wooden
pallet 2 and engaged in the wheels.
Removing the wooden pallet
Screw out the four legs on the base of the IK 300
until the two wooden blocks 3 at the sides can be
removed, as shown in Fig. 1.
To remove the wooden pallet 2, lift the IK 300 at
one of the long sides. Pull the IK 300 forwards.
The wheels are guided in the guide rail of the
wooden pallet, as shown in Fig. 2.
Set down the IK 300 before the rear wheel runs
of the pallet 2. Now lift the IK 300 slightly to allow
the wooden pallet to be removed, as shown in
Fig. 3.

Conveying the appliance

1. The appliance must be unloaded before it is
moved. Take all food out of the appliance.
2. Remove all décor panels from the appliance.
3. Attach anti-tilt device.
4. Disconnect attachments from the cavity or
wall.
5. Secure doors to prevent them from opening
unintentionally.
6. Pull appliance out of the cavity.
Attention! The integrated rollers are designed
for installation of the appliance only and are
not suitable for distances greater than 4 m.
Uneven or excessively soft floors will damage
the rollers.