Grasslin Talento Taxxi Bedienungsanleitung Seite 9

1. General
You can use the hand programming unit to transmit and receive switching programs (data).
You compile the switching programs:
• on a PC (laptop) with the software „user software"
(see separate manual)
• in the normal way, at the time switch
see the operating instructions for the time switches)
You can transfer the relevant switching program exclusively to the time switch (type)
for which the switching program was complied (pay attention to the application name).
The hand programming unit has 4 program locations.
You can transfer 4 different switching programs of read out switching programs.
Memory locations empty
Write memory locations
Delete the EEPROM – see the „user software" manual
GB
= P 1, P 2, P
= P _ 1, P _ 2, P _ 3, P _ 4
3, P 4
2